HQD GDF SERIES

HQD GDF Air-Cooled Spindles

Select the fixing architecture and air-cooling installation before choosing a GDF by power. Base Mount and Housing Mount can share a printed code, while the round-body models change ER tooling, overall length and winding specification.

When to choose an HQD GDF spindle

The listed GDF configurations are air cooled and use manual ER tooling. The range includes base fixing, housing support and round-body arrangements. Keep the mounting description with the complete code, then review the applicable air path with the enclosure and duty. A family name or ER designation cannot establish identical fixing surfaces or accessory hardware.

GDF46 Base Mount

Keep output and winding with the base configuration. The 1.5 kW and 2.2 kW assemblies have different lengths and currents; the two 2.2 kW PDFs are labeled by winding and remain specific to Base Mount.

GDF46 Housing Mount

The 2.2 kW Housing Mount shares its printed code with Base Mount but requires its own support drawing. Equal power and overall length do not settle fixing interfaces, and base-specific PDFs do not establish housing applicability.

Round-body ER11 / ER16 / ER20 models

GDF65/0.8 and GDF80/1.5 use ER11; GDF80/2.2 uses ER16; /2.2B uses ER20 with its own 125 mm clamp region. Keep the suffix and exact outline when selecting a tool or adapting a bracket.

Compare the complete configuration

Common selection questions

Does GDF46-18Z/2.2 identify the mounting arrangement by itself?

Include Base Mount or Housing Mount and compare the actual fixing drawing. The printed code is shared between those assemblies.

Does air cooling remove cooling installation checks?

Review the applicable air path, bracket, guards, enclosure, duty and supplied service instructions. The motor rating does not specify a universal clearance or thermal setting.

Does every GDF80 use the same collet family?

The listed configurations include ER11, ER16 and ER20. Retain the complete code and B suffix before selecting accessories.

HQD GDF model comparison

Rated points, curve conditions and electrical data apply to the exact supplied configuration. Compare the mounting datum, tool interface and selected winding with the installation drawing; equal series codes or power ratings alone do not establish interchangeability.

Model / ConfigurationPower / DutySpeedTool InterfaceCoolingDiameter / MountingSelection Detail
GDF46-18Z/1.5 Base Mount1.5 kW rated18,000 rpm ratedER20Air-cooledBase MountKeep the 220 V / 5.6 A and 380 V / 3 A winding choices separate.
GDF46-18Z/2.2 Base mount2.2 kW rated18,000 rpm ratedER20Air-cooledBase mountInclude Base Mount with the shared GDF46-18Z/2.2 code in every drawing and quote request.
GDF46-18Z/2.2 Housing Mount2.2 kW rated18,000 rpm ratedER20Air-cooledHousing MountKeep Housing Mount with the shared printed code in drawing and quotation requests.
GDF65-24Z/0.80.8 kW rated24,000 rpm ratedER11Air-cooledØ65 mmKeep 220 V / 3 A and 380 V / 1.6 A as separate supplied winding choices.
GDF80-24Z/1.51.5 kW rated24,000 rpm ratedER11Air-cooledØ80 mmKeep 220 V / 5.6 A and 380 V / 3 A as complete separate winding pairs.
GDF80-24Z/2.22.2 kW rated24,000 rpm ratedER16Air-cooledØ80 mmKeep 220 V / 7.6 A and 380 V / 4.4 A as complete separate winding pairs.
GDF80-24Z/2.2B2.2 kW rated24,000 rpm ratedER20Air-cooledØ80 mmKeep the B suffix with the model so the ER16 non-B version is not substituted.

ALL SPINDLES

Compare GDF configurations.

Compare tooling, cooling and operating ratings, then open the exact configuration for your machine.

FILTER SPINDLES

Showing 7 configurations

More filters

Choose a winding voltage, not a voltage shown on a power curve. Ask us if the voltage you need is not listed.

GDF Air-Cooled Spindles · 7 configurations

Air-cooled spindle configurations with different housing and mounting arrangements. Match the interface, speed and installation drawing.

INSTALLATION FIRST

Check the exact model before ordering.

CONFIGURATION & QUOTATION

Request an HQD GDF spindle quote

Send the exact model with Base/Housing or B-suffix configuration, selected winding, fixing and enclosure evidence, drive model, quantity and destination. Include collets, accessories and winding-specific document needs.

A quotation requires the exact model and physical variant, selected winding, tooling, cooling requirements, quantity and destination. For a replacement, include the existing nameplate, mounting dimensions and equipment intended for reuse. CINKR confirms the proposed supply scope, availability and delivery terms by email.

Compare other HQD series

Compare all models →